Elastomeric Stucco Paint

$62.70

Ideal for wood, vinyl and fiber cement sidings; stucco, brick, masonry and fences

Exceptional elastomeric qualities for direct application over rigid substrates.

Sheen- Flat / Matte
Packaging
  • Our Elastomeric Stucco Paint comer in one size. That size is 5 gallon pail.
Coverage
  • you can get close to 800 to 1000 s/f  out of a pail of our Elastomeric Stucco Paint over plaster, eifs and stucco.
Note. Coverage will vary on job condition.

Sold By Pallet only. 36 pails per pallet.

5% discount when you buy 7+ pallets of products in  buckets

Description

HighlightsTechnical Data

Elastomeric Stucco Paint

Elastomeric Stucco Paint is a 100% acrylic copolymer based. It is a  weather resistant coating. It has a pleasing appearance over a lots of walls and it hides cracks in old plaster very well. It was designed for direct application over rigid walls. Elastomeric Stucco Paint can be tinted to any color you like.

Packaging

Our Elastomeric Stucco Paint comer in one size. That size is 5 gallon pail.

Coverage

you can get close to 800 to 1000 s/f  out of a pail of our Elastomeric Stucco Paint over plaster, eifs and stucco.

Note. Coverage will vary on job condition. It will also vary on how you put it on.

Application Directions

Elastomeric Stucco Paint exhibits good coverage. It may be applied by brush, roller, or spray. Two coats may be required.

For one coat application. Surface must be clean, dry and free of contaminants. Clean surfaces with a mild detergent. Rinse wall with water. Allow to dry. Apply Elastomeric Stucco Paint with a brush or roller. Use a med to long nap to cover rough surfaces. For spray application. Use the following as a guide: Tip.016 to .021. Fan. 40º to 60º (8″ to 10″ fan). Pressure. 800 to 1600 psi. Brush, roll or spray out in all  directions. Maintain a wet edge at all times.

For two coat application. Allow the first coat to dry. Apply the second coat.

Elastomeric Stucco Paint

Elastomeric Stucco Paint is a 100% acrylic copolymer based. It is a  weather resistant coating. It has a pleasing appearance over a lots of walls and it hides cracks in old plaster very well. It was designed for direct application over rigid walls. Elastomeric Stucco Paint can be tinted to any color you like. If you want to know any thing else about this paint please feel free to give us a call!

New to stucco? you can find some basic (how to) videos here

Packaging

Our Elastomeric Stucco Paint comer in one size. That size is 5 gallon pail.

Coverage

you can get close to 800 to 1000 s/f  out of a pail of our Elastomeric Stucco Paint over plaster, eifs and stucco.

Note. Coverage will vary on job condition. It will also vary on how you put it on.

Storage

Store Elastomeric Stucco Paint in its original pail. Keep at temps from 40º F to 110º F. Store out of direct sunlight. Do not stack over 3 pails high.

Shelf Life

Elastomeric Stucco Paint will last close to  two years if you store it right.

Surface Preparation

Before you start to apply the Elastomeric Stucco Paint  make sure to do the following. Remove surface contaminants. 1 For previously painted surfaces. Paint must be removed. Glossy surfaces must be dulled. New concrete must be clean and cured. Elastomeric Stucco Paint can be applied to gypsum sheathing. Elastomeric Stucco Paint can be treated with drywall finishing procedures. 2 For metal surfaces. Remove oxides from surface. Prime with 2 coats of non-oil based metal primer.

Approved Substrates

You can use it on Concrete block. Gypsum sheathing. Poured concrete. Cement board. Acrylic based finishes and stucco. Do not use over wood products or painted surfaces without proper preparation first.

Mixing

Mix Elastomeric Stucco Paint to a workable consistency. No thinning is required for brush or roller application. A small amount of clean water may be added for workability. Close the lid on the pail when not in use.

Note: Do not add any thing but the water to our Elastomeric Stucco Paint.

Application Directions

Elastomeric Stucco Paint exhibits good coverage. It may be applied by brush, roller, or spray. Two coats may be required.

For one coat application. Surface must be clean, dry and free of contaminants. Clean surfaces with a mild detergent. Rinse wall with water. Allow to dry. Apply Elastomeric Stucco Paint with a brush or roller. Use a med to long nap to cover rough surfaces. For spray application. Use the following as a guide: Tip.016 to .021. Fan. 40º to 60º (8″ to 10″ fan). Pressure. 800 to 1600 psi. Brush, roll or spray out in all  directions. Maintain a wet edge at all times.

For two coat application. Allow the first coat to dry. Apply the second coat.

Precautions. Limitations

Temps must be at least 40º F during application and drying period. Do not use on wet surfaces. Do not use in very cold temps. Keep product safe from the elements. Avoid application over irregular surfaces.

Cleanup

Clean brushes, rollers and spray equipment with warm water.  Follow up with mineral spirits in spray equipment.

Warning

KEEP PAIL CLOSED WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN. NOT FOR INTERNAL CONSUMPTION. THIS PRODUCT IS FOR PROFESSIONAL USE ONLY BY A QUALIFIED TECHNICIAN.

Info contained here is to the standard specs and details of our systems. It is presented in good faith. We assume no  liability expressed  or  implied as  to  design, engineering and workmanship of any project.

This is the end of the tech info for this stucco eifs and plaster product page. please see below for other pages we think you might like.

Are you looking for EIFS Stucco or plaster products? Well you don’t have to look anymore. We have all the right products you need for any job big or small. We have base coats that are nice and creamy and wont dry up on you before you can put it on the wall. We have fiberglass mesh that is not to stiff to work with but yet makes great reinforcement. We have finish coats that sticks to the wall perfectly but at the same time is not glued to your float while your trying to get the job done. So you will be happy with all of our products! Be sure to check out our EIFS Stucco and plaster System pages to see how all our products come together to form a great system. Here are the products we are very proud to offer.