Paint Primer

Paint Primer

From: $55.55

Clear
      
   Quantity       Discount   
   7- 13   5%
SKU: N/A Categories: , Tags: ,

Product Description

Paint primer for EIFS and stucco

Our paint primer for EIFS and stucco is a exterior or interior coating. It is used before applying a finish. It can be used as a base for paint or finish. When you use our paint primer for EIFS and stucco as a base for our finish you can et more footage from each pail. paint primer for EIFS and stucco is unaffected by alkali that may be present in the wall. Our paint primer for EIFS and stucco provides water repellent qualities. It is available in white or tinted colors.

Packaging

5 gallon  plastic pails. About 45 lbs.

Coverage

You get close to 1500 sq/ft per pail of our paint primer for EIFS and stucco.

Note: Coverage varies  upon job conditions.

Application Directions

paint primer for EIFS and stucco may be applied in damp or humid weather. Do not Apply when rain is imminent. Do not apply in direct sunlight. Apply the paint primer for EIFS and stucco to achieve a coverage rate of 1500 square feet per pail.

For brush or roller application. Mix contents according to mixing directions. Use a medium to long nap cover for rough surfaces.

For spray application. Use the following recommendations or equal as a guide: Tip…………………………016-.021 Fan………………………..40º to 60º (8″ to 10″ fan) Pressure……………….800-1600 psi. It may be necessary to roll out the paint primer for EIFS and stucco with a roller to ensure contact with substrate.

Paint primer for EIFS and stucco

Our paint primer for EIFS and stucco is a exterior or interior coating. It is used before applying a finish. It can be used as a base for paint or finish. When you use our paint primer for EIFS and stucco as a base for our finish you can et more footage from each pail. paint primer for EIFS and stucco is unaffected by alkali that may be present in the wall. Our paint primer for EIFS and stucco provides water repellent qualities. It is available in white or tinted colors.

New to stucco? you can find some basic (how to) videos here.

Packaging

5 gallon  plastic pails. About 45 lbs.

Coverage

You get close to 1500 sq/ft per pail of our paint primer for EIFS and stucco.

Note: Coverage varies  upon job conditions.

Storage

Store paint primer for EIFS and stucco in its original pail at temps from 40º F  to 110º F.  Store out of direct sunlight. Do not stack more than 3 pails high.

Shelf Life

About 2 years if properly stored.

Surface Preparation

Must be clean, dry and properly cured. Surfaces must be free of dirt,  paint and any other surface contaminants.

Mixing

Mix paint primer for EIFS and stucco to obtain a uniform consistency. use a Jiffler mixer at 400-500 rpm. Avoid air entrainment.

Note: No additives or materials of any kind shall be added under any circumstances. For further mixing instructions see label on side of pail.

Curing

Initial drying will occur within 24 hours. Final cure requires 3 to 4 weeks.

Application Directions

paint primer for EIFS and stucco may be applied in damp or humid weather. Do not Apply when rain is imminent. Do not apply in direct sunlight. Apply the paint primer for EIFS and stucco to achieve a coverage rate of 1500 square feet per pail.

For brush or roller application. Mix contents according to mixing directions. Use a medium to long nap cover for rough surfaces.

For spray application. Use the following recommendations or equal as a guide: Tip…………………………016-.021 Fan………………………..40º to 60º (8″ to 10″ fan) Pressure……………….800-1600 psi. It may be necessary to roll out the paint primer for EIFS and stucco with a roller to ensure contact with substrate.

Precautions.Limitations.

Surface temps must be at least 40º F during application and initial drying period. Do not use on wet or damp surfaces or in extremely cold temps. Keep product safe from the elements. Avoid application over irregular surfaces.

Cleanup

Clean tools immediately after use with soapy water.

Warning

KEEP CONTAINER CLOSED WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN. NOT FOR INTERNAL CONSUMPTION. THIS PRODUCT IS FOR PROFESSIONAL USE ONLY.

Info contained herein conforms to the standard specifications and details  of  Facades  Systems  and  is  presented  in  good  faith. Facades  assumes  no  liability,  expressed  or  implied,  as  to  design, engineering and workmanship of any project.

This is the end of the tech info for this stucco eifs and plaster product page.

Are you looking for EIFS Stucco or plaster products? Well you don’t have to look anymore. We have all the right products you need for any job big or small. We have base coats that are nice and creamy and wont dry up on you before you can put it on the wall. We have fiberglass mesh that is not to stiff to work with but yet makes great reinforcement. We have finish coats that sticks to the wall perfectly but at the same time is not glued to your float while your trying to get the job done. So you will be happy with all of our products! Be sure to check out our EIFS Stucco and plaster System pages to see how all our products come together to form a great system. Here are the products we are very proud to offer.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.