Facades ICF EIFS System
Facades ICF Finish System is the perfect way to give an ICF (Insulated Concrete Form) home or commercial building the classic warm look of stucco.
Facades ICF Finish System complements the strong, quiet, energy efﬁcient and beautiful elements of ICF Structures. ICF Structure using the Facades ICF Finish System meet and exceed the standards established by the IRC building code.
The design options available are only limited by the imagination. Choose from a wide palette of colors and textures and decorative shapes to create the exterior design you have always imagined but never thought possible.
Base Detail- Tapered Cut Form
Base Detail- EPS Trim
Base Detail- Without Inspection Strip
Head and Sill- Bucksaver Rough Buck With EPS Trim
Head and Sill- Wood Rough Buck With EPS Trim
Head and Sill- Bucksaver Rough Buck
Head and Sill- Wood Rough Buck
Head and Sill- Flange Mount
An air barrier Insulated Concrete Form ICF EIFS system minimizes the risk of condensation within the building envelope. It does this by eliminating mass transfer of warm moisture air into the wall assembly to a cold surface where it can condense. A complete air barrier Insulated Concrete Form ICF EIFS system has individual air barrier parts. Including the connections between them. The air barrier parts must be continuous. Then it is an effective air barrier Insulated Concrete Form ICF EIFS system. You must take material compatibility and construction sequencing into account. Only then can an air tight assembly ensure long term durability. Also Consider the effects of air tightness on mechanical ventilation.
This doc contains the specifications for this Insulated Concrete Form ICF EIFS system. These specifications follow a 3 part format.
TAILOR OUR specifications
These specifications cover all the ways of using the Insulated Concrete Form ICF EIFS system. Projects use combinations of these materials and methods. To tailor the specifications to your project use those sections which apply. Place certain parts of the specification in other parts of the project’s total specification. The project design pros are responsible for ensuring that the project specifications are suitable. This specification is to be used with Insulated Concrete Form ICF EIFS system detail drawings and product data sheets etc. For assistance in preparing your specification contact us.
English Units are included in parentheses after the Standard International (SI) equivalents. The conversions represent commonly used equivalents.
An air barrier should not be confused with a vapor retarder. A retarder may be used in the wall assembly to retard water vapor diffusion. Also to reduce the risk of condensation. A vapor retarder is placed on the warm side of the wall. It is placed on the interior side in cold climates. A vapor retarder may not be necessary. It depends on the wall components. Also the range of temps and humidity conditions. As well as the mechanical ventilation. A vapor retarder should not be used in warm humid climates.
Info in this specification is to standard detail and product recommendations for the install of the Insulated Concrete Form ICF EIFS system. It is presented in good faith. We assume no liability to the architecture, engineering or workmanship. To insure that you are using the latest most complete info contact us.
PART I – GENERAL
This doc contains all the our requirements for the proper design, use, and install. Use over vertical above grade concrete, masonry, and sheathing. It is intended to be used with typical details and application instructions. Project design parameters may require special details or specifications. The project design pro should prepare this.
A. SECTION INCLUDES.
1. Insulated Concrete Form ICF EIFS system.
B. RELATED SECTIONS.
1. Unit Masonry Section 042000.
2. Concrete Sections 03300 and 034000.
3. Light Gauge Cold Formed Steel Framing Section 054000.
4. Wood Framing Section 061000.
5. Sheathing Section 061600.
6. Water Barriers Section 072500.
7.Vapor Retarders Section 072600.
8. Membrane Roofing Section 075000.
9. Flashing and Sheet Metal Section 076000.
10. Joint Protection Section 079000.
11. Windows Section 085000.
A. ASTM B117. Federal Test Standard.
141A Method 6061. Test Method of Salt Spray Fog Testing.
B. ASTM C79 specification for Gypsum Sheathing Board.
C. ASTM C150 specification for Portland Cement.
D. ASTM C297 Test Method for Tensile Strength of Flat Sandwich Constructions in Flatwise Plane.
E. ASTM D968. Federal Test Standard 141A Method 6191. Test Method for Abrasion Resistance of Organic Coatings by Falling Abrasive.
F. ASTM E84 Test Method for Surface Burning Characteristics of Building Materials.
G. ASTM E108. Modified. Method for Fire Tests of Roof Coverings.
H. ASTM E330. Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference.
I. ASTM G23. Federal Test Standard 141A Method 6151. Recommended Practice for Operating Exposure Apparatus. (Carbon-Arc Type) With and Without Water, for Exposure of Nonmetallic Materials.
O. Insulated Concrete Form ICF EIFS system Install Details.
P.Cleaning and Recoating.
Q. Expansion Joints and Sealants.
R.Water Vapor Transmission. (FS0111).
S. Insulated Concrete Form ICF EIFS system Application Instructions. (FS0514).
T. Mil Std E5272. Environmental Testing.
U. Mil Std 810B. Environmental Test Methods (mildew resistance).
V. ULC S101. Standard Methods of Fire Endurance Tests of Building Construction Materials.
A. Building Expansion Joint. A joint through the building structure. It is designed to accommodate structural movement.
B. Contractor. The contractor that installs this Insulated Concrete Form ICF EIFS system.
C. Expansion Joint. A discontinuity in the Insulated Concrete Form ICF EIFS system.
D. Facades. the manufacturer of the Insulated Concrete Form ICF EIFS system.
H. Sheathing. A substrate in sheet form.
I. Substrate. The material to which the Insulated Concrete Form ICF EIFS system is affixed.
J. Substrate Insulated Concrete Form ICF EIFS system. The total wall assembly including the attached substrate.
1.4 Insulated Concrete Form ICF EIFS system DESCRIPTION
A. Our Insulated Concrete Form ICF EIFS Finish Insulated Concrete Form ICF EIFS system consists of a base coat, reinforcing mesh and finish.
B. Method of Install. This Insulated Concrete Form ICF EIFS system is applied to the substrate.
- Design Requirements.
1. Acceptable surfaces for this Insulated Concrete Form ICF EIFS Insulated Concrete Form ICF EIFS system are Insulated Concrete Form ICF EIFS. Consisting of molded EPS manufactured with buried webs. The Insulated Concrete Form ICF EIFS must have exposed webs when additional EPS is applied to the Insulated Concrete Form ICF EIFS surface. Contact us for recommendations regarding other products. Deﬂection of substrate systems shall not exceed L/240.
- The slope of inclined surfaces shall not be less than 6:12.
- The length of inclined surfaces (EPS shapes) shall not exceed 305 mm (12 in).
- Expansion Joints.
- Location of expansion joints is the responsibility of the project designer. It shall be noted on the project drawings. Expansion joints shall be placed at the following locations.
- Expansion Joints.
1) Where expansion joints are in the substrate.
2) Where building expansion joints are.
3) At ﬂoor lines.
4) Where this Insulated Concrete Form ICF EIFS system abuts dissimilar materials.
5) Where the substrate changes.
6) In continuous elevations at intervals less than 144 ft2 (13 m2) of surface area.
7) Where structural movement occurs. The max uncontrolled length or width is 5.5 lineal meters (18 lineal feet). Max uncontrolled length to ratio of 2 ½.
8) It is the responsibility of the project design team to determine expansion joint placement.
- Shall be held back from adjoining materials a min of 19 mm (3/4 in) for sealant.
b. Terminated a min of 200 mm (8 in) above ﬁnished grade.
1) Supplied by others.
2) Compatible with the Insulated Concrete Form ICF EIFS system materials.
3) The sealant backer rod shall be of closed cell.
- Vapor Retarders. Use and location of vapor retarders is the responsibility of the project designer. It shall be noted on the project drawings and specifications.
- The use of dark colors must be considered in relation to wall surface temp. Use of dark colors in high temp climates can affect the performance of the Insulated Concrete Form ICF EIFS system.
D. Performance Requirements.
- This Insulated Concrete Form ICF EIFS system shall have been tested for durability as follows.
a. Abrasion Resistance. ASTM D968 (Federal Test Standard 141A Method 6191). no deleterious effects after 500 liters (132 gal).
- Accelerated Weathering. ASTM G23 (Federal Test Standard 141A Method 6151) 2000 hours. No deterioration.
c. Mildew Resistance. Mil Std 810B. passes.
d. Salt Spray Resistance. ASTM B117 (Federal Test Standard 141A Method 6061) 5%. Concentration for 300 hours. No deleterious effect.
- Fire performance.
- Flame Spread ASTM E84. When tested individually the adhesives and coatings shall have a Flame Spread index not exceeding 20. A Smoke Developed index not exceeding 10.
A. Product Data. The Contractor shall submit Manufacturer’s product data sheets describing products which will be used.
B. Samples. The Contractor shall submit two samples of this Insulated Concrete Form ICF EIFS system for each ﬁnish, texture and color to be used. The same tools and techniques for the actual install shall be used. Samples shall be of size to represent each color and texture.
- The applicator shall submit schedules and detail drawings. The drawings shall show details and other items as required. Then a proper evaluation can be made.
D. Test Reports. When requested the Contractor shall submit selected test reports. They must verify the performance of this Insulated Concrete Form ICF EIFS system.
1.6 QUALITY ASSURANCE.
- Insulated Concrete Form ICF EIFS system Manufacturer. Shall be Facades. All materials shall be manufactured or sold by us. All shall be purchased from us or its distributor.
- Materials shall be manufactured at a facility covered by a current ISO. 9001:2000 certiﬁcation. Certiﬁcation of the facility shall be done by a registrar accredited by the American National Standards Institute. Registrar Accreditation Board (ANSI-RAB).
- Contractor. Shall be knowledgeable in the proper install of the Insulated Concrete Form ICF EIFS system. They shall be experienced in the install of Stucco Systems. They shall possess a trained certiﬁcate from us.
- This Insulated Concrete Form ICF EIFS system shall be approved for use by building code authorities.
- Mock Up.
- The Contractor shall provide a mock up for approval.
- The mock up shall be the size required to represent the products being installed. Also include each color and texture to be used.
- Use the same equipment and techniques as the actual application. The ﬁnish used shall be from the same batch as that being used.
- The approved mock up shall be available at the job site.
1.7 STORAGE AND HANDLING
A. All materials shall be delivered to the job site in the original, unopened packages.
- Upon arrival. Materials shall be inspected for physical damage, freezing, or overheating. Questionable materials shall not be used.
- Materials shall be stored at the jobsite. Store in a cool, dry location, out of sunlight. Protected from weather and other damage. Min storage temp shall be 7°C (45 °F) for Coatings and Primers. 10 °C (50 °F) for other wet products. Minimize exposure of materials to temps over 32 °C (90 °F). Finishes exposed to temps over 43 °C (110 °F) for even short periods may exhibit skinning. Increased viscosity and should be inspected prior to use.
1.8 PROJECT CONDITIONS.
A. Environmental Requirements.
1. Application shall not take place during inclement weather. Protect materials from inclement weather.
2. Application of wet materials shall be at a min temp of 4 °C (40 °F), 7 °C(45 °F) or 10 °C (50 °F) depending on product and rising. Maintain for a min of 24 hours or until completely dry.
B. Existing Conditions.
- The Contractor shall have access to power and water. The are shall be clean.
1.9 SEQUENCING AND SCHEDULING
- Install of this Insulated Concrete Form ICF EIFS system shall be coordinated with other trades.
- Sufﬁcient manpower and equipment shall be used for continuous operation.
1.10 LIMITED MATERIALS WARRANTY
A. We shall provide a limited warranty against defective material upon written request. We make no other warranties. We dont warrant workmanship. Full details are available.
1.11 SIGN RESPONSIBILITY.
A. It is the responsibility of both the speciﬁer and the purchaser to determine if a product is suitable for their intended use. The designer shall be responsible for design, detail, structural capability, attachment details, shop drawings and the like. We have prepared guidelines in the form of specifications, application details and product data sheets to help the design process only. We are not liable for any errors in design, detail, structural capability, attachment details, shop drawings, or the like. Whether based upon the info prepared by us or otherwise. As well as changes which may have been made to our published comments.
- Maintenance and repair shall follow procedures noted in this Insulated Concrete Form ICF EIFS system Application Instructions. (FS0514)
B. All products are designed to minimize maintenance. Some cleaning may be required.
- Sealants and ﬂashings should be inspected regularly. Make repairs as necessary.
PART II -PRODUCTS
A. All components shall be obtained from us or our distributors.
A. Portland Cement: Shall be Type I, I-II or II, meeting ASTM C150, white or gray in color, fresh and free of lumps.
B. Water: Shall be clean and free of foreign matter.
C. Mechanical Fasteners: Shall be Wind-Lock’s Wind Devil™ plates, or equivalent, used in conjunction with corrosion resistant fasteners appropriate for the substrate Insulated Concrete Form ICF EIFS system.
A. Weather Barrier (at openings and penetrations).
1. WaterStop Fill. A fully formulated non cementitious. Its a water based material.
2. Grid Tape. A 100 mm (4”) wide, open weave fiberglass mesh tape.
3. Flashing Tape. A high density polyethylene backed tape.
A. Adhesives. Used to adhere the EPS architectural shapes to the Base Coat.
- Cementitious. A liquid polymer based material which is ﬁeld mixed with Portland cement. Used over non wood based substrates.
- Shall be Base Coat.
- Ready mixed. A dry blend cementitious, copolymer based product. It is ﬁeld mixed with water. Its used over non wood based substrates.
- Dry Mix Base Coat.
B. Architectural Shapes. Expanded polystyrene meeting Facades Speciﬁcation. Supplied by an EPS board supplier licensed by Facades.
- Base Coat. Shall be compatible with the EPS architectural shapes and reinforcing mesh.
- Cementitious. A liquid polymer based material. It is ﬁeld mixed with Portland cement.
- Base Coat/Adhesive.
- Non cementitious. A factory mixed fully formulated water based product.
- Synthetic Base Coat.
- Ready mixed. A dry blend cementitious copolymer based product ﬁeld mixed with water.
- Dry-Mix Base Coat/Adhesive.
D. Reinforced Meshes. Shall be a balanced open weave glass ﬁber fabric. It shall be treated for compatibility with other Insulated Concrete Form ICF EIFS system materials. It shall be available in the following weights. It shall provide the indicated min tensile strengths:
1. RM100: 152 g/m2.
(4.5 oz/yd2); 27 g/cm
2. RM100x: 203 g/m2.
(6 oz/yd2); 36 g/cm
3. RM310:407 g/m2.
(12 oz/yd2); 54 g/cm
4. RM109: 146 g/m2 (4.3 oz/yd2);
E. Admix. A modiﬁed acrylic binder.
F. Finishes. Shall be the type, color and texture as selected by the architect. It shall be one or more of the following.
- Acrylic finish. (water-based, acrylic coatings with integral color and texture).
- QuartzTex™: Swirl texture.
b. Fine QuartzTex™: Fine swirl texture.
c. FreeStylus™: Fine or varied texture.
d. PebbleFloat™: Pebble tex- ture.
- SandFloat™: Sand texture.
- Elastomeric Finish. water based acrylic coating.
- QuartzTex E™: Swirl texture.
b. Fine QuartzTex E™: Fine swirl texture.
c. Freestylus E™: Fine or var- ied texture.
d. PebbleFloat E™: Pebble texture.
- SandFloat E™: Sand texture.
- Specialty Finishes: Factory mixed, water-based acrylic.
- Coatings Shall be water based, acrylic coating with integral color and or texture and be one of the following.
- Acrylic Paint: Non textured.
- Elastomeric Paint: Non textured.
- BellaCoat™ T: Textured elastomeric coating.
- Primers and Sealers.
- Primer: A water based acrylic primer.
- Sealer: Clear acrylic sealer.
A. Secondary Moisture Protection Barrier. A secondary weather barrier must be installed over sheathed substrates. It must be wrapped into rough openings prior to install.
1. Acceptable Secondary Moisture Protection Barriers include. Tyvek® StuccoWrap™ and equals that comply with local building codes. Other code approved asphalt saturated papers are also acceptable. Trowel or roller applied weather barriers can be used if a layer of polymeric weather resistive barrier is applied over it.
- Install the Secondary Moisture Protection Barrier over the substrate. Install it according to specifications and code requirements.
- The Secondary Moisture Protection Barrier shall be free of any damage. It must be applied to all surfaces.
- Wrap the Secondary Moisture Protection Barrier into rough openings. Do this to increase the level of moisture protection to the building frame and interior.
- Coordinate work with other trades.
PART III – EXECUTION
A. Prior to install of this Insulated Concrete Form ICF EIFS system ensure that the substrate.
- Is of a type listed in Section 1.04.C.1.
- Is ﬂat within 6.4 mm (1/4 in) in 1.2 m (4 ft) radius.
- Is sound, dry. Connections are tight. Has no conditions that may interfere with this Insulated Concrete Form ICF EIFS system install.
B. The contractor shall notify the GC of all discrepancies.
- Prior to the install of this Insulated Concrete Form ICF EIFS system. All needed waterprooﬁng details shall have been completed.
3.2 SURFACE PREPARATION
A. The substrate shall be free of foreign materials.
A. The materials shall be mixed. They applied as our Commercial EIFS Application Instructions states.
1. Install additional layer of EPS when specified.
a. To face of molded Insulated Concrete Form ICF EIFS (if applicable). using adhesive, or using mechanical fasteners anchored in attachment strips in the Insulated Concrete Form ICF EIFS to satisfy structural requirements.
b. To face of extruded Insulated Concrete Form ICF EIFS (required). using mechanical fasteners anchored in attachment strips in the Insulated Concrete Form ICF EIFS to satisfy structural requirements.
2. Apply edge wrap using reinforcing mesh in base coat at all Insulated Concrete Form ICF EIFS and EPS terminations.
3. Install all EPS trim by adhering to the existing Insulated Concrete Form ICF EIFS using Facades adhesive. Allow to dry.
4. Apply a layer of the specified mesh in wet base coat mixture. Putit over the entire wall surface area and trowel smooth. The recommended method is to apply the base coat in two passes. Refer to Facades Commercial EIFS Application Instructions.
5. Allow the base coat mixture to cure a min of 24 hours. Cool, humid conditions may require longer.
6. Apply the specified finish in accordance with our printed install instructions.
3.4 FIELD QUALITY CONTROL
A. The Contractor is responsible for the proper application.
B. We assume no responsibility for application of products.
- If required, the Contractor shall certify in writing the quality of work performed. It will be relative to the substrate Insulated Concrete Form ICF EIFS system, details, install procedures, workmanship and products used.
D. If required, the EPS supplier shall certify in writing that the EPS meets our specifications.
E. If required, the sealant Contractor shall certify in writing that the sealant application is in accordance with the sealant manufacturer’s recommendations.
A. All excess materials shall be removed from the job site. It will be done in accordance with applicable law.
B. All areas where this Insulated Concrete Form ICF EIFS system has been installed shall be left free of debris.
A. This Insulated Concrete Form ICF EIFS system shall be protected from damage.
This is the end of the specification section of this page.
So if plastering is your thing then this Insulated Concrete Form ICF EIFS system is a great choice. of course you should look at all of our systems before you make that choice of which on you will be plastering with. We sell all of the products that you will need for this plaster Insulated Concrete Form ICF EIFS system. From mesh to base coat to finish we have it. If you have any questions then fell free to give us a call anytime. We are here to help you
Lost? Here is our site map of our stucco eifs and plaster site https://eifstucco.com/site-map/