Scaffolding Side Brackets
Scaffolding side brackets provide support for workers as they mount planks on the scaffolds. Side brackets are vital components the scaffolds since they enable masons to level themselves in the working face. In order for workers to achieve or surpass safety scaffolding standards, masons should observe proper installation of scaffold side brackets.
Study shows that workers often commit the mistake of using side bracket for loading purposes. They are basically not intended to hold heavy weights since they are not designed with strong pull power. It has also been found out that masons mount side brackets on the wrong side of the scaffolds with the purpose of landing spots for materials, though their function do not involve being material supporters. Below are the common failures of workers in using scaffold side brackets.
- Workers usually bend scaffolding hooks. This is because they want to streamline the weight problem by rolling off the frame under the load. Deformed side brackets are not to be included in the components of the scaffold.
- As scaffolding hooks are usually bent, masons tend to straighten them after. Hooks bent that are set back to normal can cause breaks or cracks in the scaffold hooks. The chance is, they can be broken during the installation of scaffold side brackets.
- Since most workers use side brackets for holding loads, homemade are not advisable to used. Homemade hooks likely have poor design and not strong enough to hold loads. Hoods that are deficient in size can be a failure in supporting two planks.
- The bane of most masons especially during erection of the scaffolds is the utility of components that are not inspected. Scaffolding side brackets should undergo inspection to make that they are safe to use.
- Masons usually relies on single-cleat planks. Approving bodies demand planks that have double cleats on one end.
In order to prevent the stated faults above, workers should observe the following guidelines.
- Avoid dropping scaffolding side brackets whether in the erection or dismantling process to prevent for possible cracks. Dropping or improper mishandling of these components can bend them.
- Always use double-cleated planks on one end. Hooks that have single cleats are prone to bends and defects.
- Opt for inspection. Professional engineers have background for safe side brackets. Do not conduct your own presuming inspection.
- Reject damaged hooks and other defective components. Damaged components should be kept away from the erection site. Repairs should be consulted to experts.
- In purchasing side brackets, prefer V-point hooks that are ready for mounting of pins. Hooks should be heavy-gauge, made from strong steel. Hook plates should be covered around thoroughly.
Thou side bracket is only one of the components of the scaffold; masons should always make it a practice of observing proper installation of them. Since side brackets are part of the supporting components, they should be mounted to indeed protect masons from possible accidents. Scaffolding side brackets should not only be efficient in supporting materials but also a guarantee to support workers lives.